Drain clogs rank among the most common problems homeowners have to deal with here in Dumont, NJ. The go-to option is to purchase a chemical cleanser from the local grocery store or perhaps a snake from a hardware store. But these options adopt a one-size-fits-all approach, which rarely deal with the problem in an effective manner. They usually do just enough to open the clog, but leave residual material behind, causing the clog to reform again very quickly.
3 DRAIN CLEANING TOOLS USED BY PROFESSIONALS
Most homes in Englewood, NJ and surrounding cities use forced-air furnaces for their heat. The air is warmed in the furnace itself, and then distributed through your home via the same system of ducts that carries cool air from your AC in the summer. It’s a simple and effective system, but like any other piece of technology, it can run into trouble from time to time.
Teaneck, NJ is an old community, which means that we have a number of old-fashioned heating systems in our homes. Older heaters often rely on oil for fuel, which was the staple for many years, but it now being slowly phased out in favor of more efficient and cleaner-burning fuels. The good news is that doesn’t necessarily mean you need to get rid of your existing heater, especially if it’s still running strong. An oil-to-gas conversion will refit it to burn natural gas and provide a number of terrific benefits in the bargain.
With winter on the way here in Bogota, NJ, the time has come to get your home ready for the cold weather. All indications suggest that this winter will be one of the coldest on record, and by properly winterizing your home plumbing system, you can be assured of handling it with minimal risk of problems. Considering the damage that burst pipes and other winter issues can do, it’s far better to be safe than sorry. Here’s a quick list of some steps you can take to winterize your home plumbing.
Leaks rank among the most common problems in any plumbing system, and here in Dumont, NJ, we see quite a few of them. They can be repaired fairly quickly, but they can also cause a lot of damage in the interim, especially if they take place in hidden areas like behind the walls where you won’t always notice them. Leaks rarely occur in a vacuum and most come about after a lengthy period of wear and tear on the pipes. By reducing the strain, you can reduce the damage, and thus keep the possibility of leaks to a minimum. Here’s how.